HL Q3 3110 / 780KV 3-4S Outrunner Brushless Motors CW/ CCW Set

KV: 780KV
Net weight: 93g
Stator size: 31 x 10mm
Motor size: Φ37.2 x 28mm
Idle current: 0.5A @10V
Cell number supported: 3-4S Lipo
Max continuous current: 26A
Max continuous power: 490W
Internal resistance: 0.158Ω

Includes:
2 x motors ( 1 x CW; 1x CCW)
2 x M6 prop adaptors
1 x screw bag    

* You may find there is a self-lock nut in the package (only one nut, NOT two), this is because currently there are no counter direction self-lock nuts to pair with the normal direction self-lock nut, yet when only use one nut on one of each pair motors, this may cause imbalance, so better not to use  the self-lock nut in fixing the propellers. The self-lock nut may be removed from the package at latter time, so if you find there is no such nut, then it is not a mistake but intentionally removed from the manufacturer.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.