This is a new generation of small gas quality engine, it combines the advantages of both Nitro and gasoline engines, compact in size, light weight, fuel economy, reliable and powerful.
* The engine is a side induction version, but thanks to a special design, this engine can be converted to a rear induction version, the conversion parts needed are included with the kit, so you can convert to rear induction if needed.
Engine Type: Gasoline Two-stroke, Air Cooled, Rotary Valve
Cylinder Type: Precision Steel Sleeve
Crank Type-Forged: Dual Ball Bearing Support
Mounting Type: Beam or Rail Mount and stand-off
Carburetor Type: Walbro WT Series
Carburetor Mounting: Front
Crankshaft Threads: 3/8" X 24 TPI
Plug Type: CM-6
Displacement: 2.13 cu in.(34.95cc)
Bore : 1.47 in. (37.3mm)
Stroke: 1.26 in (32mm)
Engine (Only) Weight: 1280g
Ignition Weight: 1400g
Prop Range: 18x8,18x10，20x 8
RPM Range: 2000-9000
Fuel: Unleaded Gasoline With High-Quality 100% Synthese Oil, Pre- Mixed
compression ratio: 10
Pre-Mix Oil Ratio and Type: Break-in with 25:1, General 35:1, For Air Cooled Engines
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for