3.1Compatible with all sonsorless brushless motor.
3.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
3.3Excellent start-up, acceleration and linearity features.
3.4 With 2 running modes (Racing mode and Forward/Backward mode).
3.5With 4 steps of maximum reverse force adjustment.
3.6Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
3.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
3.8Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
3.9 With8 steps of timing adjustment to get the best compatibility with various of motors. 3.10Easily program with only one button and compatible with pocket-sized program card.
3.11 Motor uses top quality materials: ● Aluminium shell (case) ● High quality magnets ● Copper wires of high temperature endurance ● Good quality bearings. 3.12 Dustproof design for the motor.
3 Programmable Items
1 Specification of The ESC
● eZRun-18A-SL: Continuous current 18A, burst current 50A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
1.3 BEC Output:
● eZRun-18A-SL: 6V/1A
● eZRun-18A-SL: 0.01 Ohm
1.5 Motor Supported: Sensorless Brushless motor
1.6 Suitable Brushless Motor: >=12T (Size: 2030)
1.7 Suitable Car: 1/18 scale car for portful race 1.8 Size:
● eZRun-18A-SL: 31.5mm(L) * 24mm(W) * 15mm(H)
1.9 Weight: (Without wires) ● eZRun-18A-SL: 19g
Motor Specs: Top quality materials: Aluminium shell (case) High quality magnets Copper wires of high temperature endurance Good quality bearings Dustproof design. Low price but good quality. Model:18T/SL KV : 5200 Diameter(mm) ： 20.0 Length(mm Without Shaft)：30 Shaft(mm)：2.0 Shaft Length(mm)：10
Includes: 1 x ESC 1 x 18T 5200KV brushless motor 1 x program card for ESC 1 x Instruction manual (English)
* The speed controller and program card in the combo are V2 since 29/06/2009.
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for