●Auto detect the cells and type of batteries, and set the cutting-off voltage accordingly, 6V/9V for 2 and 3 cell lipo, and 0.8V/cell for Ni-Mh/NiCd batteries. ●Safe start, it will not start up when throttle at wrong position. ●Over-temperature protection: The ESC will stop working when surface temperature is over 90℃. ●Lose signal protection: The ESC will stop when lost control signal for over 1 second. ●Separate BEC unit, provide high current BEC output, yet maintain good reliability of the speed controller.
Type: GX-45A-BEC · Weight: 47g / 1.66 oz · Size: 46 x 35 x 8 mm · Constant Current:50A (under good cooling environment) · Max Current: 60A (for ten seconds) · BEC: 3A @ 5V · FET No.: 12 · PWM: 8 Khz/ 16Khz · Input: 6 - 20 Ni-Mh/Ni-Cd or 2 - 7 Lipo
* This ESC was upgraded to 50A (previously 45A) since 15th Aug 2012.
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for