Universal 2-axis/ 2-axle Brushless Gimbal Controller W/ Voltage Regulator | V2.0

Weight: 17g (including sensor and wire)
Main board size: 50 x 50mm
Power input: max 4S/ 16.8V (12V is suggested)

DC regulator specs:
Input: 4.5-28V
Output: 0.5-26V adjustable
Power: 10W

* THIS CONTROLLER CAN NOT BE FLASHED WITH OTHER VERSION FIRMWARES!

Installation hint: Sensor chips side facing UP.

* Please be aware that parameter setting of gimbal controller requires great patience and experience, and the performance of your controller greatly depends on its setting. We may not able to provide guidance on tuning of your system for this gimbal controller.

Includes:

1 x Universal Brushless Gimbal Controller main board
1 x sensor
1 x connection wire
1 x voltage regulator
4 x metal terminals

Average Customer Review: 4.5 stars

7 customer review(s). [Write a review/question]

A****S

Grade:

For upgrade the firmware you must put the Baud Rate at 57200 (in Xloader) and select the null (or nulled) firmware. I have the 2.2b2 version and work fine.
February 23 2014 Was this review helpful to you?

Yes [ 1 ]

No [ 0 ] [Reply this review]

m****

Grade:

Hi everybody,
I also like to present my level.

Check this out:
1.It comes without a firmware and bootloader.
-->You have to install the bootloader first before you download the firmware.
--->You will find under the "Gimbal Pitch" the ISP-Connection (MISO,MOSI,SCK,...). ->There is a need to add some 'Pins' to connect this with a programmer. After that you can try to install the bootloader.
2.Find a firmware and ...

Does it work now?

January 30 2014 Was this review helpful to you?

Yes [ 0 ]

No [ 0 ] [Reply this review]

c****ri

Question :
i try my best but can not upgrade firmware fir it. does any did it?

July 30 2013 Was this question helpful to you?

Yes [ 0 ]

No [ 0 ] [Reply this question]

caotri

Grade:

Working well except the usb and also the Sensor connector is not tire ebought. It is easy to loose.

However, I am happy with this and buy more
July 29 2013 Was this review helpful to you?

Yes [ 0 ]

No [ 0 ] [Reply this review]

B****digan
STD member

Question :
Why is there a voltage regulator? Doesn't it work without it and how do you wire it up?
July 18 2013 Was this question helpful to you?

Yes [ 0 ]

No [ 0 ] [Reply this question]

w****onjms
Golden member

Question :
for when it is in stock???
June 28 2013 Was this question helpful to you?

Yes [ 0 ]

No [ 0 ] [Reply this question]

Discussion of this question:

jJust place preorder, it is available after 1 day. i order 2 and the system said it is ETA in once day and it is shipped the day after.
-- Jun 30 2013 by c****ri

c****ri

Grade:

Please post link to downlaod software and firmware also. Thanks
June 25 2013 Was this review helpful to you?

Yes [ 0 ]

No [ 0 ] [Reply this review]

Discussion of this review:

I found here: http://www.simplebgc.com/eng/downloads/
-- Jun 27 2013 by magstermagic

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.

Upload Image:
(Up To 5 Files, only .jpg/.gif/.png files are accepted and sizes below 2MB for each)

Post as: Review Question

Select grade: star(s)

Anonymous: Yes No

Please Log in with your account first.