Prop shaft adaptor diameter: 2.3mm (for 2.3mm motor shaft)
Spinner Backplate Diameter: 51mm/ 2"
Spinner Backplate Mounting Ring Thickness: 3.9mm
Spinner Backplate Hole Diameter: 9.5mm/ 3/8 inch
Length From Back Of Backplate To Front Of Cone: 51mm
1 x spinner cone
1 x spinner backplate
1 x mounting screw
1 x backplate mounting ring
1 x hex spanner
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for