28 poles. High torque. High efficiency. Specifically designed for Multi Rotor.It also can be used for Remote control aircrafts.
Specifications:
Model: XM5015TE-5
KV: 390RPM/V
Weight: 160g
Diameter: 50mm
Length: 36.5mm
Diameter of Shaft: 6mm
Mounting holes pitch: 19/25mm
Slots,Poles: 24, 28
Idle Current(Io) @10V: 1A
Resistance(Ri): 59mOhm
Cruising power[8 mins]: 428.92W
Bursts current[15s]: 35.13A
Peak power[15s]: 779.85W
Recommended ESC: XC6018BA
Setup 1 (No. of Cell, Prop.): 6S, up to 16x5
Max. weight of 4-rotor copter: 4.29kg
Max. weight of 3D models: 1.43kg
Memo: 4KG 4-rotor copters, 30E 3D airplanes
*HINT: THE KV PRINTED ON THE PACKING OR MOTOR ARE THEORETICAL/CALCULATED KV, THE KV NUMBER ON THE BELOW SPEC SHEET IS REAL TEST KV, SO THE KV IN THE BELOW TABLE WILL TAKE PRIORITY, AND IT IS NORMAL THAT IF THE KV ON THE PACKING OR MOTOR IS DIFFERENT TO THAT LISTED ON THE BELOW TABLE.
Includes/Requires:
Includes:
1 x motor
1 x prop adaptor
1 x motor mount
4 x prop adaptor screws
Customer Reviews:
Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for
each)