Mugen MTC2 special servo S15-M, its shell and mounting bracket is CNC machined in one piece, corresponding to the original servo mounting bracket position, the signal line is the reverse direction output so that MTC2 get the perfect wiring, S15-M has a lower center of gravity, retaining the original S15 superior performance, while using the latest servo programming card to adjust the servo in different venues and feel on the setting The S15-M has a lower center of gravity and retains the performance of the original S15 while allowing the use of the latest servo programming card to adjust the servo for different courses and feel to get better lap times.
* 7075+303 imported steel teeth
* Japan NOBLE potentiometer
* High voltage brushless motor, compatible with 6.0-8.4V
* Upgraded PCB, support SSR, SUR super high-speed mode
PowerHD 57.5g/ 16.5Kg Large Torque All Metal Digital Servo S15-M
Torque(6.0V): 11.5 kg-cm (159.7 oz/in) Torque(7.4V): 15.0 kg-cm (208.3 oz/in) Torque(8.4V): 16.5 kg-cm (229.1 oz/in) Speed: 0.072 sec (6.0V) │ 0.060 sec (7.4V) │ Speed: 0.050 sec (8.4V) Operating Voltage：6.0 ~ 8.4 DC Volts Weight: 57.5 g (2.03 oz) Bearing Type：Ball Bearing x 2 Motor Type：Brushless Motor Gear Type：Titanium & Steel Operating Temperature: -20℃~60℃ Working frequence：1520μs / 333hz Size：41.0 x 20.0 x 26.0 mm ( 1.61 x 0.79 x 1.02 in)
Includes: 1 x servo 1 x accessory bag
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for