Transmitter: T6EXAP
T6EXAP transmitter with programmable mixing and 6-model memory.
Transmitting on 40MHz band.
Operating system: 2-stick, 6 channel system
Modulation: FM(PPM) and PCM
Power supply: 9.6V Ni-Mh/ Ni-Cd or 12V alkaline battery (not included)
Current drain: 250mA
Stick mode: mode 1 and mode 2 optional (you can specify the stick mode when place an order)

Receiver: R136HP
PCM1024 6ch Receiver
Single conversion
Frequency: 40MHz

Servos:S3003
With mounting hardware and servo arm assortment.
Control system: pulse width control, 1.52ms neutral
Power requirement:4.8V or 6V from receiver
Output torque: 44.4oz-in [3.2kg-cm] @4.8V
Operating speed: 0.23sec/60°@4.8V
Size:1.59x0.78x1.41" [40.4x19.8x36mm]
Weight: 1.3oz (38.0g)

Inlcudes:
1 x T6EXAP transmitter (No RX or TX battery)
1 x R136HP PCM receiver
4 x S3003 servos

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.