This is the Fiberglass Wing Bird - Mico RC Robot bird Almost-Ready-To-Fly version.
It is a kind of mechanical bird that is made and designed by birds’ flying principles.
It is easy to control when flying.
It is made up of fiberglass, compound materials and metals.
It is the smallest and commercial R/C ornithopter in the world at present.
Body Length：345mm (13.6in)
Weight：72g (2.54oz, battery not included)
Battery：Li-Po 200-450mAh, 2S(7.4V) ( not included )
Flying time：7-15 minutes (determined by battery used)
4CH Receiver, speed controller, 2pcs 3.6g servos and mixing machine with V-tail (If you use transmitters with more than 6 channels, you can setup function of V-tail mixing control on transmitters.)
Motor：N60 brush motor and 10A ESC
120 size brushless motor and 10A ESC
1 x firberglass wing bird
2 x 3.6g Blue Arrow micro servos
1 x BA-BL1230 4200KV brushless motor ( carbon shell )
2 x 6 teeth pinions
1 x 10A Towerpro brushless speed controller
1 x BA-R3P4 JV Receiver ( with V tail mixer ) ( Please specify the band 35Mhz/40Mhz/72Mhz when placing your order )
1 x sticker
1 x manual
1 x 200-450mah/7.4V lipo battery & charger
1 x 4 ch. transmitter
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for