REPTILE500 4-axial/Xcopter DIY Frame - Standard Edition

Motor spacing(distance between motor axles, cross side): 500mm
Weight: 550g
Mode: 4-axial, X mode
Central board material: Fiberglass, 1.5mm thick
Arm Material: engineering plastics
Landing skid type: high landing skid, easy-disassemble design
Height of landing skid: 190mm
Motor mounting seat spacing: 16cm/ 19cm

Suggested setting (not included):
brushless motor: HL 3525 series or HiModel 2212-2217 series or AX 2810Q.
KV range: 3S Lipo 800-1100KV; 4S Lipo 600-700KV
Suitable camera mount/tile: T12 (suite for Gopro HD19 camera etc)
Propeller size: 10-11inch 2-blade; 8-9 inch 3-blade

* Not assembled, camera mount/tilt sold separately.

Includes:
2 x central boards
4 x arms
1 x screw bag

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.