Lithium Polymer (Li-poly) & Ni-Mh battery packs, battery chargers, Electric (Brushless) Motors, Electric Speed Controllers ( ESC ), Gyros, Electric Accessories etc.
This ESC is specially designed for ROCK CRAWLER.
1 Specification of The ESC
1.1 Output: Continuous current 35A, burst current 190A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo. Note1
1.3 BEC Output: 6V/1.5A.
1.4 Resistance: 0.0015 Ohm
1.5 Motor Supported: Sensorless Brushless motor.
1.6 Suitable Brushless Motor: >=32T
1.7 Suitable Car: Rock Crawler
1.8 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
1.9 Weight: 30g(Without wires).
Note1:
● For 4-6 cells NiMH or 2S Lipo: You needn’t change the cooling fan coming with the ESC;
● For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
2 The Motor Suitable For The Rock Crawler
3 Features
3.1 Special program for rock crawler.
3.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
3.3 Excellent start-up, acceleration and linearity features.
3.4 With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
3.5 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
3.6 Easily program with only one button and compatible with pocket-sized program card.
3.7 Motor uses top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings.
3.8 Dustproof design for the motor.
3 Programmable Items (Click the following picture to enlarge it)
For detail information, please read the user manual for reference.
Electric 
