● Compatible with all sonsorless brushless motor.
● Use top quality electronic components to enhance the current endurance ability of the ESC.
● Excellent start-up, acceleration and linearity features.
● With 2 running modes (Racing mode and Forward/Backward mode).
● With 4 steps of maximum reverse force adjustment.
● Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
● With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
● Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
● With 8 steps of timing adjustment to get the best compatibility with various of motors.
● Easily program with only one button and compatible with pocket-sized program card.
● Output: Continuous current 18A, burst current 50A.
● Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo.
● BEC Output: 6V/1A.
● Resistance: 0.01 Ohm.
● Motor Supported: Sensorless Brushless Motor
● Suitable Brushless Motor: 12T and > 12T
● Suitable Car: 1/18 on-road or off-road cars / trucks for normal race or sportful race.
● Size: 31.5mm(L) * 24mm(W) * 15mm(H).
● Weight: 19g(Without wires)
1 x ESC
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for