UltraPower UP10 AC100W / DC200W 2x10A Dual Channel Smart Balance Charger/Discharger

Lithium Polymer (Li-poly) & Ni-Mh battery packs, battery chargers, Electric (Brushless) Motors, Electric Speed Controllers ( ESC ), Gyros, Electric Accessories etc.

Electric

Battery Chargers & Battery Accessories

Lithium Polymer Battery ( Li-Poly, LIPB) Chargers

AC/DC dual-input: runs from AC 100-240V mains, or from a DC 11-18V supply for up to 200W total.
Two fully independent output channels, each up to 10A, so two different battery types or cell counts can charge at once without interference.
Supports LiPo, LiHV (4.45V/cell), LiIon, LiFe (1-6S), NiMH/NiCd (1-16S) and Pb/lead-acid (2-24V, 1-12S).
32-bit ARM chip for high charging accuracy and comprehensive protection: over-current, over-voltage, reverse-connection, short-circuit and thermal protection, plus flame-retardant housing material.
2.4 inch 320x240 color IPS screen, readable even in direct sunlight, showing live voltage/current/capacity and per-cell balance voltages.
Worldwide AC voltage support (100-240V) with a built-in multi-language interface.

UltraPower UP10 AC100W / DC200W 2x10A Dual Channel Smart Balance Charger/Discharger

Input Voltage: AC 100-240V, DC 11.0-18.0V
Output Voltage: 0.1-26.1V
Charging Current: 0.1-10.0A x 2
Discharge Current: 0.1-5.0A
Charge Power: DC input 2x100W; AC input max. CH1+CH2=100W (supports 2x50W power distribution)
Discharge Power: 2x10W
Charging Accuracy: less than 0.005V
Balance Current: max. 500mA/cell
Battery Types: LiHV (4.45V/cell), LiPo / LiFe / LiIon (1-6S), NiMH / NiCd (1-16S), Pb (2-24V, 1-12S)
LCD Screen: 2.4 inch 320x240 IPS
Dimensions: 135 x 105 x 58mm
Weight: 550g / 19.40oz

Includes:
1 x UltraPower UP10 charger

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.

Upload Image:
(Up To 5 Files, only .jpg/.gif/.png files are accepted and sizes below 2MB for each)

Post as: Review Question

Select grade: star(s)

Anonymous: Yes No