1 Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. 2 Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. 3 User programmable. 4 Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field. 5 Compatible with Lipo and NiMH battery. 6 Timing can be changed to be suitable for different brushless motors. 7 Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection.
Hobbywing SKYWALKER Series 2-6S 80A Electric Speed Control (ESC) SkyWalker-80A-UBEC - XT60
Hobbywing SKYWALKER Series 2-6S 80A Electric Speed Control (ESC) SkyWalker-80A-UBEC
1 Output: Continuous 80A, Burst 100A up to 10 seconds. 2 Input Voltage: 2-6S Lipo, 5-18 cells NiMH. 3 BEC: 5A / 5V Switch mode BEC. 4 Refresh rate of the throttle signal: 50Hz to 432Hz. 5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = BrushLess Motor) 6 Size: 86mm*38mm*12mm. 7 Weight: 82g. 8. Connector: input XT60 (output empty)
Includes: 1 x ESC
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for