This is HiModel Professional 30A ESC with external UBEC, special designed for electric helicopters.
* Startup music playing functionality.
* Extreme low resistance, double radiators, super current endurance.
* Low-voltage cutoff / over-current protection / over-heat protection / throttle signal lost protection
* 3 startup modes: Normal / Soft / Super-Soft startup, can be used for both fixed-wing aircraft or helicopter models
* Throttle range can be configured, fully compatible with all market available transmitters.
* Smooth and accurate speed control, excellent throttle linearity.
* Microprocessor and BEC use separate voltage regulator IC , with good anti-jamming capability.
* Supported highest motor speed: 210000 RPM(2 poles), 70000 RPM(6 poles), 35000 RPM(12 poles).
* Own complete intellectual property rights, software can be upgraded for our customers.
* Programming CARD in a very small size can be purchased additionally (for easily programming this controller on field).

CE certified, click here for CERTIFICATE OF COMPLIANCE

Model:Professional-30A/UBEC
Input Voltage Range: 2-4 Cell Lipoly or li-ion ; 5-12 Cell NiMh/NiCd
Current:30 Acontinue 40 A burst (10s)
BEC (Output current):2A
2Cell Lipoly /5-7 Cell NiMh,5 servo max
3Cell Lipoly /8-10 Cell NiMh,4 servo max
4 Cell Lipoly /11-12 Cell NiMh,2 servo max
Size:45x25x11mm
Weight:32.4g / 1.14 oz

Click here for CE Certificate
All the HiModel electric speed controllers (ESC) are comply with RoHS standard, the certificate is under processing.

Includes:
1 x ESC with external UBEC unit
1 x English Manual

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.