High reliability and durability: up to 8S LiPo and 160A continuous current - explosive power, very large output and excellent linearity for precise, responsive control under high load.
Built-in Bluetooth: connect the HOBBYWING HW LINK mobile app directly for parameter settings, data reading and firmware upgrades - no extra devices needed (effective range about 5m).
Built-in data logging for performance monitoring.
IP67 fully waterproof (splash, water and dust) - ready to use without extra waterproofing. Tested to GB/T 4208-2017 and IEC 60529; protection is not permanent and may decrease with wear and aging.
Manufacturer Code: 30206200 Cont. / Peak Current: 160A / 800A LiPo: 3-8S BEC: Switch mode 6V / 7.4V / 8.4V @ 8A Input Wires: red + black 10AWG, 160mm Input Connector: none Output Wires: 3 x black 12AWG, 150mm Output Connectors: 6.5mm gold female Type: Brushless, sensorless Programming: HOBBYWING HW LINK app via built-in Bluetooth (LED/LCD program boxes and OTA Programmer not supported) Data Logging: extreme values, real-time data, built-in historical data (graph) Size: 91 x 41 x 25.5mm Weight: 220g (with wires and output plugs) Applications: boats up to 120cm
Includes/Requires:
Includes: 1 x HOBBYWING SeaKing 160A V4 3-8S ESC 1 x User manual
Requires (not included): 1 x Brushless boat motor with 6.5mm male bullet connectors - e.g. HOBBYWING SeaKing 4082SL V2 (recommended pairing) Battery connector - none fitted; solder a connector rated for the ESC's current to the input wires
Comments:
Bluetooth effective range is only about 5m - stay close to the boat when using the app.
Customer Reviews:
Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for
each)