Protections designed specifically for boats: low-voltage, over-temperature, throttle signal loss and overload protection - robust hardware plus optimized software for high-load reliability.
IP67 fully waterproof (splash, water and dust) - ready to use without extra waterproofing. Tested to GB/T 4208-2017 and IEC 60529; protection is not permanent and may decrease with wear and aging.
High-output built-in BEC with adjustable voltage, able to power high-performance and high-voltage servos.
Programmable with the LED Program Box, LCD G2 Program Box, LCD PRO or OTA Programmer; data logging and firmware upgrade supported.
Slim design: 36mm wide - narrower than the SeaKing 120A V3.
Manufacturer Code: 30302363 Cont. / Peak Current: 120A / 500A LiPo: 2-6S BEC: 6V / 7.4V / 8.4V @ 8A (max. 25A) Input Wires: red + black 12AWG, 150mm Input Connector: none Output Wires: 3 x black 12AWG, 100mm Output Connectors: 4.0mm gold female Type: Brushless, sensorless Programming: LED Program Box, LCD G2 Program Box, LCD PRO, OTA Programmer (via throttle wire + yellow signal wire) Data Logging: extreme values, real-time data, external OTA historical data (graph) Size: 64.7 x 36.3 x 22.5mm Weight: 123.5g (with wires and output plugs) Applications: boats up to 100cm
Includes/Requires:
Includes: 1 x HOBBYWING SeaKing 120A V4 2-6S ESC 1 x User manual
Requires (not included): 1 x Brushless boat motor with 4.0mm male bullet connectors - e.g. HOBBYWING SeaKing 3674SL V2 (recommended pairing) Battery connector - none fitted; solder a connector rated for the ESC's current to the input wires
Customer Reviews:
Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for
each)