The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.
3 working modes : - Manual mode: Turn the knob with different speed, check the reaction time - Neutral mode: Make the servo go back to the neutral point - Automatic "window wiper" mode: Make the servo swing like window wipers in the biggest angle.
Application samples: Test 1-3 servos at the same time and test the synchronism and consistency of 1-3 servos. Test 1-3 ESCs at the same time and test and compare the respective reaction times. Test 3 servos of CCPM structure helicopters at the same time, and use the neutral position and synchronization function to debug the helicopter and servos. Test the servos on the fixed-wing aircraft and use the neutral function to perform the servo test.
CCPM Servo Tester
Size: 36.5 x 31.0 x 22mm Output: ≤15mA (5.0) Input: DC 4.8-6V Output signals: 1.5ms±0.5ms
Includes: 1 x servo tester
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for