SKYDROID 5.8G 150CH OTG FPV Receiver for Smart Android Phone/ PC Monitor
Frequency : 5645MHz~5945MHz
Resolution : 640*480 30fps
Working Current : USB 5V 190mA
Working Temp. : -10~65℃
Please calibrate it before use
Please calibrate it in open area, and keep away from transmitter more than 30m. Long press the menu button and power on receiver, enter into calibration mode.
3 Working Methods
Android Smartphone : Support OTG cable connect to android smartphone or tablet(no ios)
1. Install APP :
or search "FUAV" in store to download.
2. Use OTG cable connect with receiver
3. After it power on, press the menu button for 3 seconds,it will self-search frequency and lock the strongest signal automatically.
to check if your smartphone support USV:
how to use
how to use it with computer
1. Use usb cable to connect it with PC
2. XP: open the camera;WIN7: install AMCP camera software;WIN10: open camera. Or MP groundstation
3. After it power on, press the menu button for 3 seconds,it will self-search frequency and lock the strongest signal
1. Use 4P cable (should DIY by player), 5V power input
2. After it power on, press the menu button for 3 seconds,it will self-search frequency and lock the strongest signal
Do not support IOS system.
Some smartphones should open the otg function before use.
Some players have complained that it has the issue of flicker or short distance. After testing in open area, the reason has been found to be its high scanning accuracy,that the transmitted frequency is reflected by wall indoors and make the real frequency detected by receiver higher than it should be. So it is quite important to operate it in an open area and keep the receiver and transmitter more than 30m.