D12-8 Tee/ T-type Landing Gear Clamps - Black (2pcs) 

Suit for tube diameter:  Vertical tube diameter 12mm (outer diameter);  horizontal tube diameter 8mm (outer).
Material: Aluminum.
Weight: 3.8g (each)

Includes:
2 x T-joint clamps
2 x screws (M3 x 18)
2 x screws (M3 x 20)
2 x M3 nuts

* Once install the tubes, if the short screws can be screwed on, then you can use the short ones (no need for nuts), otherwise you can use the longer screws with nuts to fix the tubes. 

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.