| Radio Sets, Receivers, Servos, Gyros and Crystals etc.
The computer-designed, ergonomically-styled transmitter case ensures a comfortable fit in your hands.
You will also be introduced to JR exclusive "Rolling Selector" movement through any programming sequence.
The ultra-precision control sticks offer adjustable spring tensions and length. The throttle stick offers a ratchet in Airplane/Sailplane configuration. Stick modes 1-4 are menu selectable.
30-model memory storage allows programming of all parameters of thirty separate airplanes, sailplanes or helicopters; you can program more than one setup for a single aircraft, allowing you to instantly change the flight characteristics.
Model Number: NET-N239ES
Encoder: 9-channel computer system
RF Module: Plug-in-Module TS-72J
Output Power: Approximately 750mw
Current Drain: 200ma
Power Source: 1.2V x 8 Ni-Cd (9.6V) 600mAh
Output Pulse: 1000-2000 (1500 neutral)
Available Channels:17,18,19,20, 21, 50, 51, 52, 53 and 54.
Model Number: RS10DS auto scan
Type FM: 10-channel/double conversion new ABC & W circuitry
Channel Selection: Auto search system
Weight: 38 gm
Size mm (LxWxH): 32.5 x 19 x 38.5mm
Model Number: NEC-322AUS
Input Voltage: AC-240V
Output Current: 50mA TX/100 mA RX
Charging Time: 15 Hours
1 x transmitter
1 x RS10DS auto scan receiver
4 x ES539 servos W/ hardware
1 x 4N1100 Ni-Cd 4.8V/1100mah battery
1 x charger NEC-322AUS
(* No TX battery supplied with the radio set)
The Mode of the sticks can be chosen with the mode selection function of the radio. You can choose from Mode 1, 2, 3 or 4. The transmitter comes set to Mode 1. If Mode 2 or Mode 4 are chosen you will need to remove the back of the transmitter cover and swap the throttle ratchet and elevator spring.
(Refer to Instruction Menual page 22 for more details )