| Radio Sets, Receivers, Servos, Gyros and Crystals etc. |
| |
|
35Mhz JR PCM9X II 9-channel Synthesized Radio System W/ RS10DS, 4x ES539 |
|
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
| Tags: 35Mhz JR PCM9X II 9-channel Synthesized Radio System W RS10DS 4x ES539 |
|
||||||||||
The computer-designed, ergonomically-styled transmitter case ensures a comfortable fit in your hands. You will also be introduced to JR exclusive "Rolling Selector" movement through any programming sequence. The ultra-precision control sticks offer adjustable spring tensions and length. The throttle stick offers a ratchet in Airplane/Sailplane configuration. Stick modes 1-4 are menu selectable. 30-model memory storage allows programming of all parameters of thirty separate airplanes, sailplanes or helicopters; you can program more than one setup for a single aircraft, allowing you to instantly change the flight characteristics. |
||||||||||
|
||||||||||
■Transmitter Specifications: Model Number: NET-N239ES Encoder: 9-channel computer system RF Module: Plug-in-Module TS-35J Modulation: PPM/SPCM/ZPCM Output Power: Approximately 750mw Current Drain: 200ma Power Source: 1.2V x 8 Ni-Cd (9.6V) 600mAh Output Pulse: 1000-2000 (1500 neutral) Band: 35Mhz Available Channels: 55-90. ■Receiver Specifications: Model Number: RS10DS Auto scan Type FM: 10-channel/double conversion new ABC & W circuitry Sensitivity: 5uV/m Selectivity: 8Khz/50dB Channel Selection: Auto search system Weight:32g Size:16x38x53mm ■Servos: Type: ES-539 Torque:4.8kg.cm Speed:0.23 sec Weight: 38 gm Size mm (LxWxH): 32.5 x 19 x 38.5mm Ballbearing: Yes Motor: Ferrite ■Charger: Model Number: NEC-322AUS Input Voltage: AC-240V Output Current: 50mA TX/100 mA RX Charging Time: 15 Hours |
||||||||||
|
||||||||||
Includes: 1 x transmitter 1 x RS10DS auto scan receiver 4 x ES539 servos W/ hardware 1 x charger NEC-322AUS (* Note: we only sell the radio system in complete set, and do not sell the transmitter nor other components separately, so please do not ask. No TX battery supplied with the radio set) |
||||||||||
|
||||||||||
Mode selection: The Mode of the sticks can be chosen with the mode selection function of the radio. You can choose from Mode 1, 2, 3 or 4. The transmitter comes set to Mode 1. If Mode 2 or Mode 4 are chosen you will need to remove the back of the transmitter cover and swap the throttle ratchet and elevator spring. (Refer to Instruction Menual page 22 for more details ) HiModel 2006/07/10 |
||||||||||
|
Please explain: Messages of this section are not monitored by HiModel, it is for review and discussion among customers only. Post as:
Review Question Select grade: star(s) |