Features:
●Compatible with all sonsorless brushless motor.
●Use top quality electronic components to enhance the current endurance ability of the ESC.
●Excellent start-up, acceleration and linearity features.
●With 2 running modes (Racing mode and Forward/Backward mode).
●With 4 steps of maximum reverse force adjustment.
●Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
●With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
●Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
●With 8 steps of timing adjustment to get the best compatibility with various of motors.
●Easily program with only one button and compatible with pocket-sized program card.

● Output: Continuous current 35A, burst current 190A.
● Input: 4-12 cells NiMH/NiCd or 2-4 cells LiPo. Note1
● BEC Output: 6V/1.5A.
● Resistance: 0.0015 Ohm.
● Motor Supported: Sensorless Brushless Motor
● External diameter of the water cooling pipe: 4.0mm
● Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
● Weight: 30g(Without wires)

Note1:
For 4-9 cells NiMH/NiCd or 2-3 cells Lipo: You needn’t change anything of the ESC.
For 10-12 cell NiMH/NiCd or 4 cell Lipo: You must disable the output of built-in BEC, and use a 3A UBEC to supply the receiver.

Programmable Items:

Includes:
1 x ESC
1 x water colling system (pre-installed)
1 x Instruction manual (English)

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.