| Lithium Polymer (Li-poly) & Ni-Mh battery packs, battery chargers, Electric (Brushless) Motors, Electric Speed Controllers ( ESC ), Gyros, Electric Accessories etc.
1. Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.
2. Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
3. Programmable Items:
●Brake Settings: brake enabled / brake disabled, default is brake disabled
●Battery Type: Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.
●Low Voltage Protection Mode(Cutoff Mode) : power reducing / power cutoff, default is power reducing.
●Low Voltage Protection Threshold(Cutoff Threshold) : low / medium / high, default is medium cutoff voltage.
1) For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.
2) For Ni-xx battery, low / medium / high cutoff voltages are 0/45%/60% of the startup voltage. (0% means the low voltage cutoff function is disabled).
●Startup mode: normal / soft / super-soft, default is normal startup.
●Timing: low / medium / high, default is medium timing.
4. Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.
Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise
Output: Continues 6A, Burst 8A up to 10 Secs.
Input Voltage: 2 – 3s Lipo or 5 -9 cells NiCd/NiMH
BEC (Battery Elimination Circuit) Output: linear mode BEC 0.8A
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
Click here for CE Certificate
and RoHS certificate
1 x ESC
1 x English Manual
Primary Additional Accessories
for the completion of the HiModel Professional Series 6A / 8A Electric Brushless Speed Control Type Professional-6A
who bought the above may also need