●Shiny 4 digits red LED's to display the measured values.
●Power source can be from UM-4 / AAA cell x 4,or an adapter with 7-15V or BEC(5V) from an ESC.
●An output port for applying Postitive/Negative signals of Pulse Width from this tester.
●Four buttons for setting up functions and modes.
●Portable and durable tester.

Size: 140 x 70 x 20 mm / 5.51 x 2.76 x 0.79"
Weight:110g / 3.89 oz( Batteries not included)

●To measure the directions/range of rotation of servo.
●To test the sensitivity of servo(1 μ S per step minimum).
●To test the rotations of servo automatically or manually.
●To measure the pulse width coming from receiver.
●To measure the pulse width transmitted by transmitter for up to 9 channels.
●To measure RPM of a spinning propeller -for 2-6 blades ones,to show RPM measured promptly,and or set the peak RPM value as well.
●To measure the spinning propeller up to RPM 99990.

1 x English /Chinese manual.
1 x MT-1.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.