B6 is a high performance Li-ion/LiPo balancer, it has a microprocessor to detect and balance each cell voltage of the 2 to 6 cells in series.
LED indicate the balance state of the battery pack, “FLASH” shows the high voltage cell is discharged till the difference of voltage reaches the lowest level. If all LEDS are off, your battery pack is balanced.
Cooperation with charger, the built-in software can detect the cell voltage in charging. When any cell voltage reaches 4.25v, it will buzz to prevent the battery overcharged
B6 is the smallest balancer, its size is 72*42*13.5(mm)
B6 independently work, it doesn't need any input, just connect the B6 to the balance connector on your pack. It automatically balance instantly until the pack is balanced.
Automatically detect and display battery balance status for any 2 to 6 cells pack
Imbalance voltage warning and balancing
Audio alarm for over voltage
Audio alarm for under voltage
LED(s) display each cell in balancing
Alerts full charge status
Balance 2 battery packs simultaneously
With Special Connector Conversion Board(CCB) to fit all kinds of battery connectors
Operating Temperature: 0~40℃
Storage Temperature: -20~85℃
Operating Relative Humidity: 5~95%RH
Dimension: 72*42*13.5(mm, L*W*H)
Case Material : Al alloy
Balances Connector : JST EHR 6PIN
B6 is fully committed to compliance with the European Union’s RoHS directive.
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for