THIS IS THE NEW ELECTRIC VERSION JR9XII RADIO SYSTEM, COME WITH MICRO DIGITAL METAL GEAR SERVOS.
The computer-designed, ergonomically-styled transmitter case ensures a comfortable fit in your hands.
You will also be introduced to JR exclusive "Rolling Selector" movement through any programming sequence.
The ultra-precision control sticks offer adjustable spring tensions and length. The throttle stick offers a ratchet in Airplane/Sailplane configuration. Stick modes 1-4 are menu selectable.
30-model memory storage allows programming of all parameters of thirty separate airplanes, sailplanes or helicopters; you can program more than one setup for a single aircraft, allowing you to instantly change the flight characteristics.
Model Number: NET-N239ES
Encoder: 9-channel computer system
RF Module: Plug-in-Module TS-72J
Output Power: Approximately 750mw
Current Drain: 200ma
Power Source: 1.2V x 8 Ni-Cd (9.6V) 600mAh (battery not included, only come with battery holder)
Output Pulse: 1000-2000 (1500 neutral)
Available Channels:17,18,19,20, 21, 50, 51, 52, 53 and 54..
* Programme language: English
* Manual language: English
Model Number: RS77S Auto scan
●SPCM 7ch receiver
●Available for PCM transmitter (SPCM mode)
●Auto Scan System
Type: DS362 metal gear mini digital servo
Size : 30x13x28.5mm
Torque:3.8 kg.cm torque
1 x transmitter
1 x RS77S auto scan receiver
3 x DS362 servos W/ hardware
The Mode of the sticks can be chosen with the mode selection function of the radio. You can choose from Mode 1, 2, 3 or 4. The transmitter comes set to Mode 1. If Mode 2 or Mode 4 are chosen you will need to remove the back of the transmitter cover and swap the throttle ratchet and elevator spring.
(Refer to Instruction Menual page 22 for more details )
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for