Transmitter: T6EXAP
T6EXAP transmitter with programmable mixing and 6-model memory.
Transmitting on 35MHz band.
Operating system: 2-stick, 6 channel system
Modulation: FM(PPM) and PCM
Power supply: 9.6V Ni-Mh/ Ni-Cd or 12V alkaline battery (not included)
Current drain: 250mA
Stick mode: mode 1 and mode 2 optional (you can specify the stick mode when place an order)

Receiver: R136F
R136F FM 6 cannel receiver
Receiving on 35Mhz band
Intermediate frequencies:455kHz
Power requirement: 4.8V or 6V
Current drain: 9.5mA @ 4.8V
Size: 1.31x1.98x0.71" (33.4x50.3x18.1mm)
Weight: 0.98oz (27.8g)

Servos:S3003
With mounting hardware and servo arm assortment.
Control system: pulse width control, 1.52ms neutral
Power requirement:4.8V or 6V from receiver
Output torque: 44.4oz-in [3.2kg-cm] @4.8V
Operating speed: 0.23sec/60°@4.8V
Size:1.59x0.78x1.41" [40.4x19.8x36mm]
Weight: 1.3oz (38.0g)

Includes:
1 x T6EXAP PCM1024 transmitter
1 x R136F 6 channel receiver
1 x switch harness
1 x RX battery holder
4 x S3003 servos
1 x English manual

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.