Matek RGB5050 2-LED, 5V Motor Seat LED Plate, Blue (suit for 1806, 2204, 2206 motors) 2pcs
Power supply: 4-6V DC Power: 0.6W @5V, 0.12A Dimension: plate diameter 28mm Thickness: 1.2mm Weight: 1.5g Color: Blue
Compatible motor spacing: 18xx motors: M2 screw, 11.5 to 16.5mm screw hole spacing 22xx motors: M3 screws, 15.5 to 19.5mm screw hole spacing
Hint: 1. You can connect two SAME COLOR LED plates in serial when use 12V power supply (like 12V BEC etc.) You cannot use 12V power input for one single LED plate. Different color LED plates cannot be connected in serial. 2. It is suggested NOT to use your main battery as power supply to the LED plates, to avoid the possibility of short circuit of your main power during crash.
2 x LED Motor Seat plates 1 x 30cm power wire
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for