Tags: Radiolink  R6DSM  2.4G  10CH  DSSS  FHSS  SBUS  Receiver  for  AT9  AT9S  Transmitter  AT10  AT10II 

Features:

Features:
– 1g weight,15*13mm size,micro mini receiver,spciecally designed for mini drone,no burden for your drone
– Strong anti-interference,DSSS and FHSS spread spectrum working synchronously
– SUBS signal,Precision: 4096, 0.25us per section, servo anti-shake rudder
– Suitable for: AT9/ AT9S/ AT10/ AT10II transmitter
– Control Distance: 600 meters, the actual distance is related to flying environment

Specifications:

Radiolink R6DSM 2.4G 10CH DSSS FHSS SBUS Receiver for AT9 AT9S AT10 AT10II Transmitter

– Channel: 10 channels(support SBUS and PPM output)
– Working Voltage: 4.8-6V
– Working Current: 38-45mA (input voltage:5V)
– Dimensions: 15*13mm
– Weight:1g
– Precision: 4096, 0.25us per section, servo anti-shake rudder
– Control Distance: 600 meters, the actual distance is related to flying environment
– Suitable for: AT9/ AT9S/ AT10/ AT10II



How to match code with transmitter:

1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R6DSM
3. Press down and hold the ID SET switch on side of the receiver for over 1 second, LED starts to blink indicating the code matching in progress.
4. When  the LED stops blinking means the code matching process complete.
5. Confirm that your servos is responding to your transmitter accordingly. 


How to switch signal:

Press the ID SET button (on the side of the receiver) twice promptly (within 1 second), it will toggle the receiver between SBUS and PPM signal modes. 


* NOTE:
After binding your receiver to the transmitter, please switch off and on again of your transmitter, to double check that your receiver receives the signal from the transmitter and controlled by the transmitter. 

Includes/Requires:

Includes:
1 x receiver R6DSM