Tags: Xinyi,  2.4Ghz,  stick  type,  car  radio,  N-3,  N-3S 

Features:

THIS IS THE STICK TYPE 3-CH CAR RADIO.

* 3 channels End Point Adjustment
* Support dual rate function for the STEERING.
* Sub-trim for THROTTLE channel and STEERING channel.
* Mode names can use up to 5 letters and numbers, so that easily understood names can be set. A model memory with different fine setups can be created by using the model copy function. Sixteen models can be added.
* Brake mixing for large cars (BRAKE)
* Anti-skid braking system (A.B.S)
* SPEED:
TH-SPEED: Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
ST-SPEED: When you sense that the steering servo is too fast, etc., the servo operating speed 9direction that suppresses the maximum speed) can be adjusted.
* Auto-Start function (ATS):
A pre-set throttle position, less than full throttle, to be used for the initial acceleration off the line without having wheel spin. When the trigger is released, auto-start is turned off and throttle operates normally again.
* Racing timer (TIMER)
The two timers: Down_timer and UP_Timer.
* Digital trim function:
The current trim position is displayed on the LCD screen.

Specifications:

Specifications:
●TYPE: LED Edition N-4Q
●Code format: PCM
●Technology of DSSS (direct sequence spread spectrum) 2.4g radio transmission and receiving
●Working frequency is the worldwide universal frequency band of ISM (industrial scientific and medical) free of charge, and the range is from 2.4 Ghz to 2.483 Ghz.
●Max transmitting power: 10dBm 100mA.
●Max receiving sensitivity: -93dBm.
●Working current at transmitting end: 100ma to 150A.
● Working current at receiving end: < 50mA.
●Data transfer rate: 19200 bit/sec.

TRANSMITTER:
Code format: PCM
Channels: 3
Frequency: 2.4G
DC: 9.6V, ≤150ma
Net Weight: 530g

RECEIVER:
Code format: PCM
Channel number: 3
Frequency: 2.4g
DC: 4.8 to 5.6V, ≤50mA
New weight: 13.5g

* Plain carton packing.

Includes/Requires:

Includes:
1 x 2.4G transmitter
1 x 3-channel 2.4G receiver
1 x instruction manual (English)

(*No RX battery, no TX battery, no servos)