SKYRC D200 110-240V AC 1-6S 2x10W Balance Charger W/ Soldering Iron D200
SKU |
SKYD200 |
Brand |
SKYRC |
Added |
2015/11/24 |
Updated |
2018/07/12 |
|
|
Features:
|
| SKYRC D200 is a dual output charger, which supports power distribution with AC source. It has new functions, like, Terminal Voltage Control (TVC), Battery Meter, Battery Internal Resistance Meter. | |
| It has software protection, like, Current Limit, Capacity Limit, Temperature Threshold and Charging Time Limit.It supports PC control and firmware upgrade. | |
| Additionally,it has a built in soldering iron that can heat up to 450℃ with heavy duty 60W, the temperature is adjustable from 200-450℃. | |
|
|
|
|
|
| Dual Output
SKYRC D200 allows you to charge two different battery packs simultaneously. | | |
| Power Distribution
With AC source, if you set the maximum output power of channel A xW, then that of channel B will be yW(y=200-x). | | |
| LiHV Modes
SKYRC D200 can charge /dicharge 4.35V LiHV battery. | | |
| Soldering Iron
Power: 60W, Temperature Range: 200-450℃ (392-842℉) Spare tips: pencil tip×1pc, chisel tip×1pc | | |
|
| It has a built in soldering iron that can heat up to 450℃ with heavy duty 60W. | | | SKYRC D200 has built in cell voltage balancer. | | | Current Limit Capacity Limit Temperature Threshold Charging time Limit | | | User can store 20 charge/discharge profiles which can be called out without any special program setting. | | | User can check battery pack's total voltage, and each cell's voltage. | | | User can check battery pack's total internal resistance, and each cell's internal resistance. | | | User can use 'Charge Master' controlling and viewing real time data with graphs, also can update firmware with it. | | | User can modify the end voltage (for expert only). | | | Support LiHV battery. | | |
|
|
|
| User can monitor battery pack's total voltage, individual cell voltage etc., and view real time data and graphs of related specs during charging/discharging. Also user can use 'Charge Master' to update firmware. | |
|
|
|
|
|
|
|
Specifications:
SKYRC D200 110-240V AC 1-6S 2x10W Balance Charger W/ Soldering Iron D200
| Dimension | | |
| Net Weight | | 1260g |
| Input Voltage | | AC100-240V / DC 11-20V |
| Charge Circuit Power | | DC Input CH A 200W / CH B 100W |
| AC Input 200W (Support Power Distribution) |
| Discharge Circuit Power | | 2 x 10W |
| Charger Current Range | | CH A 0.1-20A / CH B 0.1-10A |
| Discharge Current Range | | 0.1-5A |
| Current Drian for Balancing Port | | Max 300mA/cell |
| Trickle Charging Current | | 30mA-300mA & OFF |
| LiPo/LiFe/Lilon/LiHV Battery Cell Count | | 1-6S |
| NiMH/NiCd Battery Cell Count | | 1-15S |
| Pb Battery Voltage | | 2-20V |
|
|
Includes/Requires:
Includes:
1 x charger with soldering iron D200