HiModel Professional Series 18A / 22A Brushless ESC Type Professional-18A
    SKU HW18AP
    Brand HiModel
    Added 2006/11/15
    Updated 2011/07/04
     
    Tags: HiModel_Professional_Series_18A_22A_Brushless_ESC_Type_Professional-18A 

    Features:

    ■Featurers:
    1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

    2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

    3 Programmable Items:

    ●Brake Settings:brake enabled / brake disabled, default is brake disabled

    ●Battery Type:Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd),default is Li-xx.

    ●Low Voltage Protection Mode(Cutoff Mode) :power reducing / power cutoff, default is power reducing.

    ●Low Voltage Protection Threshold(Cutoff Threshold) :low / medium / high, default is medium cutoff voltage.

    1) For Li-xx battery,number of battery cells are judged automatically,low / medium / high cutoff voltage for each cell are: 2.5V/2.75V/3.0V. For example: 3 Cell Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.75*3=8.25V.

    2) For Ni-xx battery, low / medium / high cutoff voltages are 60%/65%/70% of the startup voltage. For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*65%=9.4V。

    ●Startup mode: normal / soft / super-soft, default is normal startup.

    ●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

    4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

    ■Advantages

    1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

    2 Extreme low resistance, super current endurance.

    3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

    4 Compatible with Program Card.

    Specifications:

    Specification

    1 Output: Continues 18A, Burst 22A up to 10 Secs.

    2 Input Voltage: 5.6V --- 16.8V ( Lithium : 2 – 4s or NiMH/NiCd 5 -12 Cells)

    3 BEC (Battery Elimination Circuit) Output:linear mode BEC 2A

    4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrusheLess Motor)

    5 Size:24mm*45mm*11mm(width*length*height)

    6 Weight: 19g

    * Shrinking tube color may vary from the picture.

    Click here for CE Certificate and RoHS certificate.
    Back to computer version.
          Back
    Loading...