Tags: HiModel_2-6S_80A_100A_Electric_Brushless_Speed_Control_Type_Professional-80A 

Features:

●Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
●Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
●Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to its default setting.
● Full Protection Features: Low voltage cutoff protection / over-heat protection / throttle signal lost protection.

Advantages:

Military standard capacitor with extreme low resistance is used at voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
Extreme low resistance PCB is used at power output section to get the best current endurance capability.
Big heat sink has a very good cooling effect.
Microprocessor uses separate voltage regulator IC, with good anti-jamming capability
Compatible with Program Card code HWPRCA.

Specifications:

Type: Professional-80A (With BEC)
Output: Continuous 100A, Burst 120A up to 10 Secs.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
BEC: 3A / 5V (Switch mode).
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
Size: 70mm (L) * 31mm (W) * 14mm (H).
Weight: 62g.


Click here for CE Certificate
All the HiModel electric speed controllers (ESC) are comply with RoHS standard, the certificate is under processing.

Includes/Requires:

Includes:
1 x ESC
1 x English Manual