HiModel 2-6S 80A / 100A Electric Brushless Speed Control Type Professional-80A-OPTO
    SKU HW80AP
    Brand HiModel
    Added 2007/05/08
    Updated 2014/01/21
     
    Tags: HiModel_2-6S_80A_100A_Electric_Brushless_Speed_Control_Type_Professional-80A-OPTO 

    Features:

    1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

    2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

    3 Programmable Items:

    ●Brake Settings: brake enabled / brake disabled, default is brake disabled

    ●Battery Type: Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd),default is Li-xx.

    ●Low Voltage Protection Mode(Cutoff Mode) : power reducing / power cutoff, default is power reducing.

    ●Low Voltage Protection Threshold(Cutoff Threshold) : low / medium / high, default is medium cutoff voltage.

    1) For Li-xx battery,number of battery cells are judged automatically,low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 10 Cells LiPo, when medium cutoff voltage is set, the cutoff voltage is: 2.85*10=28.5V.

    2) For Ni-xx battery, low / medium / high cutoff voltages are 0%(ie. never cut off )/45%/60% of the startup voltage. For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V

    ●Startup mode: normal / soft / super-soft, default is normal startup.

    ●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

    4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

    Advantages

    1 Military Standard Capacitor with extreme low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

    2 Extreme low resistance PCB used on power output section, the thickness of copper sheet is more than 0.7mm.So the whole ESC has super current endurance capability.

    3 Compatible with Program Card code HWPRCA.

    Specifications:

    Type: Professional-80A-OPTO
    Output: Continues 80A, Burst 100A up to 10 Secs.

    Voltage Input: Lithium : 2 – 6s or NiMH/NiCd 5 -18 Cells

    BEC (Battery Elimination Circuit) Output: None

    Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrusheLess Motor)

    Size:55mm*66mm*14mm(width*length*height)

    Weight: 91g / 3.21oz

    Click here for CE Certificate
    All the HiModel electric speed controllers (ESC) are comply with RoHS standard, the certificate is under processing.

    *This ESC is OPTO version and does not have BEC output, which means you need a separate RX battery pack or external BEC unit to power the receiver and servos.

    Includes/Requires:

    Includes:
    1 x ESC
    1 x English Manual
    Back to computer version.
          Back
    Loading...