SKU | EZRUN35A |
---|---|
Brand | HOBBYWING |
Manual | Manual 1 |
Added | 2008/03/21 |
Updated | 2015/08/29 |
Features:
Features:●Compatible with all sonsorless brushless motor.
●Use top quality electronic components to enhance the current endurance ability of the ESC.
●Excellent start-up, acceleration and linearity features.
●With 2 running modes (Racing mode and Forward/Backward mode).
●With 4 steps of maximum reverse force adjustment.
●Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
●With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
●Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
●With 8 steps of timing adjustment to get the best compatibility with various of motors.
●Easily program with only one button and compatible with pocket-sized program card.
Specifications:
Specification:●Output: Continuous current 25A, burst current 90A.
●Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1
●BEC Output: 6V/1.5A.
●Resistance: 0.0015 Ohm.
●Motor Supported: Sensorless Brushless Motor
●Suitable Brushless Motor: 9T and > 9T
●Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race.
●Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
●Weight: 30g(Without wires)
*Note1:
For 4-6 Cell Ni-xx: You needn't change the fan coming with the ESC;
For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
Programmable Items
Includes/Requires:
Includes:1 x ESC
1 x colling fan (pre-installed)
1 x Instruction manual (English)