Ezrun-35A Brushless ESC + 12T/3650 (3279KV) Motor + Pro-card Combo for 1/10 Car
    SKU EZ35CB12
    Brand HOBBYWING
    Added 2008/03/21
    Updated 2010/06/03
     
    Tags: Ezrun-35A_Brushless_ESC_12T_3650_3279KV_Motor_Pro-card_Combo_for_1_10_Car 

    Features:

    * The speed controller and program card in the combo are V2 since 29/06/2009.

    This is the saving combo.
    ESC Features:
    ● Compatible with all sonsorless brushless motor.
    ● Use top quality electronic components to enhance the current endurance ability of the ESC.
    ● Excellent start-up, acceleration and linearity features.
    ● With 2 running modes (Racing mode and Forward/Backward mode).
    ● With 4 steps of maximum reverse force adjustment.
    ● Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
    ● With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
    ● Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
    ● With 8 steps of timing adjustment to get the best compatibility with various of motors.
    ● Easily program with only one button and compatible with pocket-sized program card.

    Feature of motor:
    ● Top quality materials:
    ● Aluminium shell (case)
    ● High quality magnets
    ● Copper wires of high temperature endurance
    ● Good quality bearings
    ● Dustproof design.
    ● Low price but good quality, easy to use.

    Specifications:

    ESC Specification:
    ● Output: Continuous current 25A, burst current 90A.
    ● Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1
    ● BEC Output: 6V/1.5A.
    ● Resistance: 0.0015 Ohm.
    ● Motor Supported: Sensorless Brushless Motor
    ● Suitable Brushless Motor: 9T and > 9T
    ● Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race.
    ● Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
    ● Weight: 30g(Without wires)

    * The speed controller and program card in the combo are V2 since 29/06/2009.

    *Note1:
    For 4-6 Cell Ni-xx: You needn't change the fan coming with the ESC;
    For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);

    Programmable Items


    Motor Specs:
    Motor shaft: 3.17mm
    Diameter: 35.8mm
    Length: 50mm (excluding motor shaft)
    Shaft length: 15mm
    Weight: 167g



    *This combo is a cross brands of HiModel + Hobbywing.

    Includes/Requires:

    Includes:
    1 x ESC
    1 x ESC colling fan (pre-installed)
    1 x 12T 3279KV brushless motor
    1 x program card for ESC
    1 x Instruction manual (English)

    Back to computer version.
          Back
    Loading...