EMCS 45A Brushless Speed Controller W/Switch mode 3A BEC Type LDG45A-S
    SKU LDG45AS
    Manual Manual 1
    Added 2007/12/18
    Updated 2008/05/17
     
    Tags: EMCS_45A_Brushless_Speed_Controller_W_Switch_mode_3A_BEC_Type_LDG45A-S 

    Features:

    * startup forbidden if throttle position error
    * learning throttle track
    * alarm and close output without receiver signal
    * Global originative "6 phase(3 channel*2 arm) independent real-time
    * overcurrent and overload protection", reduce the chance of output MOSFET damage to lowest
    * temperature detection and protection
    * low voltage detection and protection
    * Multifunctionally regulate the moto characteristics
    * optionally connect to PC or programmer to set menu
    * real-time update hardware via PC software(under developing)
    * Software optimization,compatible with over 98% of the brushless motor
    * Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.
    * Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
    * Low Voltage Protection Mode(Cutoff Mode) : soft cut / cutoff,default is soft cut.
    * Battery Type: Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd),default is Li-xx.
    * Low Voltage Protection Threshold(Cutoff Off Voltage) : low / middle / high,default is middle.
    1) For Li-xx battery,number of battery cells are judged automatically,low / middle/ high cutoff voltage for each cell are: 2.6V/2.85V/3.1V.
    2) For Ni-xx battery, low / middle / high cutoff voltages are 0%(ie. never cut off )/45%/60% of the startup voltage.
    * Startup mode: normal / soft / very soft,default is normal.
    * Brake Mode: brake Off/low brake/middle break/high break, default is brake off
    * Timing option: low / middle / high, default is middle timing.
    * Programmable current limiting: very sensitive/sensitive/standard/insensitive/disable, default is standard.
    * Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection / current high protection.

    Specifications:

    EMCS 45A brushless ESC With 3A SWITCH BEC
    Dimensions:50*26*16mm
    Weight:39g
    Continuous current at 25℃:60A Burst current at 25℃:Burst 80A up to 10 Secs
    Continuous current at 70℃:45A Burst current at 70℃:Burst 60A up to 10 Secs
    Input Voltage:7.2V-23V
    BEC (Battery Elimination Circuit) Output:3A/5V(Switch)
    Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
    Resister:0.0025Ω

    *SOFTWARE DOWNLOADS:
    download emcs esc setup software

    download emcs esc download EMCS ESC USB driver

    Includes/Requires:

    Includes:
    1 x ESC
    Back to computer version.
          Back
    Loading...