3 IN 1 Multifunction LCD Program Box (Integrated with USB adaptor and Lipo Voltmeter)
    SKU HW3IN1
    Brand HOBBYWING
    Manual Manual 1Manual 2
    Added 2013/02/26
    Updated 2016/03/21
     
    Tags: Program  box,  program  card,  Hobby  wing,  ESC  firmware  upgrader 

    Features:

    1 Working Modes
    1.1 Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen.
    1.2 Works as an USB adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC by HOBBYWING USB LINK SOFTWARE .
    1.3 Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell.

    This Multifunction LCD Program Box is suitable for the following ESC:
    PLATINUM series helicopter/aircraft ESC
    XERUN & EZRUN series Car ESC (Version 2.0 and 2.1)
    XERUN-120A V3 & V3.1 ESC
    Seaking pro Series ESC (Does not compatible with normal Seaking ESCs, and only compatible with the Seaking PRO series)

    A) The programmable items for the XERUN and EZRUN series car ESC:
    1 Running Mode
    2 Drag Brake Force
    3 Low Voltage Cut-Off Threshold
    4 Start Mode
    5 Maximum Brake Force
    6 Maximum Reverse Force
    7 Initial Brake Force
    8 Throttle Neutral Range
    9 Timing
    10 Over-Heat Protection
    11 Motor Rotation
    12 Lipo Cells Amount
    *Note: Some speed controllers have less programmable items, but some have more. Please read the user manual of your speed controller to get detail information.

    B) The programmable items for the PLATINUM series airplane ESC:
    1 Brake
    2 Battery Type
    3 Low Voltage Protection Mode (Cutoff Mode)
    4 Low Voltage Protection Threshold (Cutoff Threshold)
    5 Start Mode
    6 Timing
    7 Governor Mode
    8 Reserved Item #1
    9 PWM Frequency
    10 Built-In BEC Output
    11 Reserved Item #2
    12 Lipo Cells Amount

    Specifications:

    Specifications
    1 Size: 90mm (L) * 51mm (W) * 17mm (H)
    2 Weight: 65g
    3 Input Voltage: 4.5-12.6V
    (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box)
    4 Displayer: 16*2 characters LCD.
    5 Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)

    Includes/Requires:

    Includes:
    1 x multifunction pro-box
    1 x USB cable
    1 x English/Chinese Manual
    Back to computer version.
          Back
    Loading...