Tags: A123  style,  LiFePo4  battery 

Features:

This is the new LiFePo4 battery cell.
● Long circling life
● Safer in use, fast charge capable

* Nickel tabs (solder tabs) are pre-installed, you can built your own pack simply use an electrical iron.

Specifications:

Nominal capacity and voltage 2.3 Ah, 3.3 V
Internal impedance (1kHz AC) 8 mΩ typical
Internal resistance (10A, 1s DC) 10 mΩ typical
Recommended standard charge method 3A to 3.6V CCCV, 45 min
Recommended fast charge current 10A to 3.6V CCCV, 15 min
Maximum continuous discharge 70A
Pulse discharge at 10 sec 120A
Cycle life at 10C discharge, 100% DOD Over 1,000 cycles
Recommended pulse charge/discharge cutoff 3.8V to 1.6V
Operating temperature range -30°C to +60°C
Storage temperature range -50°C to +60°C
Weight: 73g / 2.58 oz
Voltage: 3.2V
Capacity:2300mAh
Diameter: 26 mm
Length: 65mm


* LiFePo4 packs are not suppose to be charged or discharged to the same voltages as Lithium polymer batteries, please be are aware of the differences.
* Only use Chargers compatible with LiFePo4 batteries.
*Specifications provided by manufacturer, performance may vary depending on use conditions and application.
HiModel makes no warranty explicit or implied with this datasheet.

Includes/Requires:

Includes:
1 x LiFePo4 battery (loose cell)