●Safe start, it will not start up when throttle at wrong position.
●Throttle range auto-detect.
●Lose signal protection: The ESC will stop when lost control signal for over 1 second.
● Weight: 124g / 4.37 oz
● Size: 65 x 40 x 16 mm
● Constant Current:200A (under good cooling condition)
● Max Current: 230A (for ten seconds)
● BEC: No
● Cut-off: 3.0V per cell for Lipo
● PWM: 8 Khz, 16Khz
● Input: 5 - 20 Ni-Mh/Ni-Cd or 3 - 7 Lipo (6-30V)
* Water cooling system must be used for boat application (not provided with the ESC), damage due to poor ventilation is not covered by warranty.
*This ESC is OPTO version and does not have BEC output, which means you need a separate RX battery pack or external BEC unit to power the receiver and servos.
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for