The Professional-100A-HV supports 5-12S Li-poly battery pack or 15-36 cells NiCd/NiMH battery pack. It is a good choice for big RC aircraft and helicopter models.
● Extreme low resistance PCB used on power output section, the whole ESC has super current endurance capability.
● Military standard capacitor with extreme low resistance used on voltage input section, this will increase the ability to prevent unwanted RF Noise/ Interference.
● protection features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.
● 3 startup modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopter models.
● Throttle range can be configured, fully compatible with all market available transmitters.
● Smooth and accurate speed control, excellent throttle linearity.
● Highest motor speed supported: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
● Program Card in a very small size can be purchased additionally for easily programming the ESC on field.

Type: Professional-100A-HV
● Output: Continues 100A, Burst 120A up to 10 Secs.

● Input Voltage: 5-12 cells lithium battery or 15-36 cells NiMh/NiCd

● BEC (Battery Elimination Circuit) Output：None

● Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)

● Size：55mm x 78mm x 15mm(width x length x height)

● Weight: 125g

Includes:
1 x ESC
1 x English Manual

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.