KV: 700KV Net weight: 93g Stator size: 31 x 10mm Motor size: Φ37.2 x 28mm Idle current: 0.4A @10V Cell number supported: 3-4S Lipo Max continuous current: 22A Max continuous power: 470W Internal resistance: 0.121Ω
Includes: 2 x motors ( 1 x CW; 1x CCW) 2 x M6 prop adaptors 1 x screw bag
* You may find there is a self-lock nut in the package (only one nut, NOT two), this is because currently there are no counter direction self-lock nuts to pair with the normal direction self-lock nut, yet when only use one nut on one of each pair motors, this may cause imbalance, so better not to use the self-lock nut in fixing the propellers. The self-lock nut may be removed from the package at latter time, so if you find there is no such nut, then it is not a mistake but intentionally removed from the manufacturer.
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for