2.4G CORONA DSSS 14-Channel RF Module & RX System for Futaba Transmitter (RF CT14F, RX CR14)
    SKU CT14FU
    Brand CORONA
    Added 2009/10/10
    Updated 2010/01/22
     
    Tags: 2.4G,  CORONA,  14-Channel,  RF  Module,  Futaba  Transmitter 

    Features:

    The new lightweight, advanced technology unit has the following features:
    1. Extended operating range 1.5 km range, which has been tested in a real flying environment.

    2. A 3dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal.

    3. One-key user friendly setup mode.

    4. Perfect receiver antennas guarantee the plane receives the signal regardless of the maneuver or attitude.

    5. The unique receiver design makes the Corona module easy to install and ensures reliability.

    6. Corona's advanced needle design ensures the lightest possible receiver

    Specifications:

    RF Module Specs:
    Type: CT14F DSSS
    Size: 54X30X25MM
    Weight: 27g
    Operating voltage: 5V (Futaba)
    Operating current: 150mA
    Output Power: <100MW
    Compatible with: FUTABA:T14MZ/T12FGH/T12Z

    Receiver Specs:
    Type: CR14 DSSS
    Size: 37.5X52.5X16MM
    Weight: 21g
    Range: >1500M
    Sensitivity: -100dbm
    Number of Channel: 14
    Operating voltage: 4.8V-6V
    Operating current: 40mA
    Compatible with: CT14F

    Includes/Requires:

    Includes:
    1 x RF module 2.4G CT14F
    1 x antenna
    1 x 2.4Ghz 14CH Receiver CR14

    Comments:

    Binding procedure (please follow the sequence exactly as below, the sequence is very critical for a success binding):
    1. Connect the Corona 2.4G module to the trainer port of the transmitter.
    2. Switch on the transmitter while holding down the binding button of the module.
    3. Power on the receiver while holding down the binding button of the receiver, LED will blink twice.
    4. Switch off the receiver and transmitter.
    5. Repower on the receiver.
    6. Repower on the transmitter. (The receiver MUST be powered on before the transmitter)

    The LED of the receiver will blink quickly and light on.
    (Contributed by "qzr06725 ")
    Back to computer version.
          Back
    Loading...