| SKU | 03-103P |
|---|---|
| Brand | HiModel |
| Added | 2006/08/23 |
| Updated | 2008/06/05 |
Specifications:
Type: Φ89×H58 Ducted Fan ( EDF )Applicable motor: Brushless B28 3200KV ( included )
Thrust: 650-1000 g
Speed controller required:50A (brushless) ( not included )
Inner Diameter: 29mm
Outer Diameter:91.3mm (Not including the flange nor fins)
Hight: 57mm / 73mm ( Without / with the flange ring )
Motor Housing Inner Diameter:29mm
Motor Collet Diameter: 2.3mm (for 2mm shaft )
Weight: 250g / 8.8oz (with brushless motor)
HiModel Electric Ducted Fan Specification (for reference only)
Code | Size/mm | Blades | Main body weight (g) | Ring | Recommend Motor | Shaft Dia. /mm | ESC | Battery capacity | Voltage | r.p.m |
| Blades fixing method | |
03-098P | Φ48×H28 | 3p | 11.5 | 0 | Brushed Motor | 130-180 | 2.0 | 5A | Lipo 800MAH | 7.2-11.1V | 40000up | 90-150g | direct push |
Brushless Motor | B20 | 2.0 | 10A | Lipo 800MAH | 9.4-14.8V | 4000kv | 100-200g | ||||||
03-099P | Φ50×H28 | 6p | 12.5 | 0 | Brushed Motor | 130-180 | 2.0 | 5A | Lipo 800MAH | 7.2-11.1V | 40000up | 100-200g | direct push |
Brushless Motor | B20 | 2.0 | 10A | Lipo 800MAH | 9.4-14.8V | 4000kv | 150-350g | ||||||
03-100P | Φ55×H42 | 6p | 18.5 | 0 | Brushed Motor | 370 | 2.0 | 15A | Lipo 1600MAH | 7.2-11.1V | 40000up | 150-250g | once center balanced,fix with AB glue |
Brushless Motor | B28-47-09S | 2.0 | 18A | Lipo 1600MAH | 9.4-14.8V | 4000kv | 200-400g | ||||||
03-101P | Φ65×H58 | 6p | 30 | 12 | Brushed Motor | 370 | 2.3 | 25A | Lipo 2200mah | 7.2-11.1V | 30000up | 250-400g | once center balanced,fix with AB glue |
Brushless Motor | B28-47-09S | 3.17 | 36A | Lipo 2200mah | 9.4-14.8V | 4000kv | 750-950g | ||||||
03-102P | Φ68×H58 | 5p | 59.5 | 13 | Brushed Motor | 380 | 2.3 | 15A | Lipo 2400-3300MAH | 7.2-11.1V | 30000up | 300-400g | once center balanced,fix with AB glue |
Brushless Motor | B28-47-09S | 3.17 | 40A | Lipo 2400-3300MAH | 9.4-14.8V | 4000kv | 750-950g | ||||||
Note:
1. This EDF can be powered by both brushless and brushed motors, but the motor shaft adaptors are differnt for brushless motors and brushed motors.
2. DO NOT use brushed motor adaptor for brushless motor, vice versa.
3. To ensure the best thrust output, special attention must be given to the power centeral line when assemble .
4. It can be dangerous when testing the EDF:
①DO NOT stand in front of nor tangent face of the blades.
②DO fix the EDF before power on, DO NOT hold by hands when testing.