Snapper6 65mm Micro FPV Racer Quadcopter (Flysky Receiver Edition)
    Added 2018/05/22
    Updated 2018/05/22
    Tags: Snapper6  65mm  Micro  FPV  Racer  Quadcopter  drone  whoop  (Flysky  Receiver  Edition)  0603 


    - Betaflight support , multi flight mode: ACRO/AIR/ANGLE
    - Powerful Brushless motor and Smooth ESC
    - CNC aluminum alloy propeller guard
    - Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
    - Adjust the settings and the PID of the flight controller via OSD
    - Flysky version support both AFHDS and AFHDS-2A Protocol


    Snapper6 65mm Micro FPV Racer Quadcopter  (Flysky Receiver Edition)

    Brand name: Happymodel
    Item name: Snapper6 FPV racing Drone
    Wheelbase: 65mm
    Receiver: Compatible Frsky receiver / Compatible Flysky Receiver
    Size: 81mm*81mm*36mm

    Items Specifications
    SE0603 19000KV brushless motor

    Configu-ration: 9N12P
    Stator diamter: 6mm
    Stator length: 3mm
    Shaft diameter: Φ0.8mm
    Motor dimension(Dia.*Len): Φ9mm*15.5mm
    Weight(g): 1.7g
    No.of cells(Lipo): 1S
    Crazybee F3 flight controller

    Firmware: Betaflight_3.3.0_Crazybee
    MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
    Sensor: MPU-6000(SPI connection)
    Board size: 28.5 * 28.5MM
    Board weight: 3.5g
    Power supply: 1S battery input (DC 3.5-4.35V)
    Built-in 5A(each) Blheli_S 4 in 1 ESC Dshot600 ready
    Built-in Frsky receiver with telemetry (D8/D16 switchable)
    Built-in Betaflight OSD (SPI Control)
    Built-in Current meter Max 14A
    Built-in 5V 0.8A BEC with LC filter
    Built-in voltage detection
    BLHELI_S pass-through ready
    Heading LED ready
    BLHeli_S 5A 4 in 1 ESC

    Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
    Current: 5A continuous peak 6A (3 seconds)
    Support BLHeliSuite programmable
    Factory firmware: O_L_5_REV16_6.HEX
    Default protocol: DSHOT600
    Flysky receiver version

    SPI BUS receiver
    Protocol: AFHDS and AFHDS-2A Switchable
    Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
    No ground interference (Transmitter and receiver 1m from the ground): 300m
    Failsafe support
    AIO Camera & VTX

    Output power: 25mw
    Frequency: 48CH
    Input voltage: 3.3V 5.5V
    Current consumption: 300mA(type)
    Camera resolution: 700TVL
    Field of view: 120°
    Video format: NTSC
    Antenna: RG178 antenna
    Frequency: 5.8GHz 6 bands 48 channels
    With raceband: 5474 5945 MHZ
    Size: 13.9"12.0mm (L*W)
    Weight: 3g
    Betaflight support, multi flight mode: ACRO/AIR/ANGLE.
    Powerful brushless motor and smooth ESC. 
    CNC aluminum alloy propeller guard. 
    Betaflight OSD support, easy to get RSSI, voltage and other info from your goggles.
    Adjust the settings and the PID of the flight controller via OSD.
    Flysky version support both AFHDS and AFHDS-2A Protocol Flysky transmitter.
    Full telemetry function ready.
    Head lights ready.
    Camera angle adjustable.


    - 1 x Snapper 6 Frame
    - 1 x Crazybee F3 FC (Flysky)
    - 4 x SE0603 KV19000 Motor
    - 1 x 31mm 3-blades propeller(4cw+4ccw)
    - 1 x AIO Camera & VTX
    - 1 x USB Lipo/LIHV Charger
    - 1 x Propeller disassemble tool
    - 1 x Screwdriver

    1 x 1S Lipo battery (recommended type: 450mah, 30C, size: about 60x18x7mm)

    Battery is NOT included, we provided 2 compatible connectors with the kit. 

    Back to computer version.