Pixhawk PX4 Multi-mode Open Source Autopilot Flight Controller | V2.43
    SKU PIX243
    Added 2014/08/26
    Updated 2014/08/26
     
    Tags: Pixhawk  PX4  Multi-mode  Open  Source  Autopilot  Flight  Controller  V2.43 

    Features:

    Features

    • Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS
    • 14 PWM/servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible)
    • Abundant connectivity options for additional peripherals (UART, I2C, CAN)
    • Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply
    • Backup system integrates mixing, providing consistent autopilot and manual override mixing modes
    • Redundant power supply inputs and automatic failover
    • External safety button for easy motor activation
    • Multicolor LED indicator
    • High-power, multi-tone piezo audio indicator
    • microSD card for long-time high-rate logging
    Microprocessor:
    • 32-bit STM32F427 Cortex M4 core with FPU
    • 168 MHz/256 KB RAM/2 MB Flash
    • 32 bit STM32F103 failsafe co-processor
    Sensors:
    • ST Micro L3GD20 3-axis 16-bit gyroscope
    • ST Micro LSM303D 3-axis 14-bit accelerometer / magnetometer
    • Invensense MPU 6000 3-axis accelerometer/gyroscope
    • MEAS MS5611 barometer
    Interfaces:
    • 5x UART (serial ports), one high-power capable, 2x with HW flow control
    • 2x CAN
    • Spektrum DSM / DSM2 / DSM-X® Satellite compatible input
    • Futaba S.BUS® compatible input and output
    • PPM sum signal
    • RSSI (PWM or voltage) input
    • I2
    • SPI
    • 3.3 and 6.6V ADC inputs
    • External microUSB port
    Power System:
    • Ideal diode controller with automatic failover
    • Servo rail high-power (7 V) and high-current ready
    • All peripheral outputs over-current protected, all inputs ESD protected


    * This controller doesn't come with GPS, customers can use their own standard GPS module (with compass). 

    Specifications:

    Pixhawk PX4 Multi-mode Open Source Autopilot Flight Controller | V2.43

    • Weight: 38g (1.31oz)
    • Width: 50mm (1.96")
    • Thickness: 15.5mm (.613")
    • Length: 81.5mm (3.21")
    • Current sensor capacity: 100A (XT60 connector)

    Pixhawk is a PPM-input autopilot, which means that it gets RC input from a single cable to the receiver, either via the PPM port, the Futaba S.BUS port, or the special satellite receiver port for Spektrum gear.

    Includes/Requires:

    Includes: 
    1x Pixhawk autopilot main board
    1 x outer case
    1 x 100A current sensor
    1 x Buzzer
    1x Safety switch button
    1x SD card (512M)
    1 x wire set


    Requires:
    1 x GPS (with compass)

    Back to computer version.
          Back
    Loading...