OS Glow Plug A3
    SKU OSHTA3
    Brand OS
    Added 2004/11/28
    Updated 2008/11/18
     
    Tags: OS_Glow_Plug_A3 

    Specifications:

    Mainly for small size engines of .10-.46
    For Running-in Beginners (rich needle setting) & sports
    For every applications-Airplane, Helicopters, car & boat.

    For R/C Aircraft
    Running-in, Engines smaller than .32 capacity and 40/46LA

    For R/C Helicopter
    Running-in, Smaller than .32 capacity engines(for beginners)

    For R/C Cars
    Running-in For beginners (rich needle setting)

    Comments:

    When to replace the Glowplug
    Apart from when actually burned out, a plug may need to be replaced because it no longer delivers its best performance, such as when:
    *Filament coil has become distorted.
    *Filament surface has roughtened/turned white.
    *Foreign matter had adhered to filament or plug body has corroded.
    *Engine tends to cut out when idling.
    *Starting qualities deteriorate.

    How Glowplug Ignition Works
    With a glowplug engine, ignition is initiated by the application of a 1.5 volt power source. When the battery is disconnected, the heat retained within the engine's combustion chamber remains sufficient to keep the engine running ignition timing is automatic: At higher rpm, the plug becomes hotter and appropriately, fires the fuel/air charge earlier; at reduced rpm, the filament becomes cooler and ignition is retarded.


    Back to computer version.
          Back
    Loading...