SKU | MN-10AD |
---|---|
Brand | ZTW |
Added | 2015/03/14 |
Updated | 2015/03/14 |
Features:
There are two versions for this ESC, one is finished version with wires soldered in place, another is DIY version, wires of DIY version need to be soldered by customers as needed.
Specifications:
SuperN 10A 2-3S Mini Electric Speed Controller for Mini Multicopters (Simonk Firmware) - DIY Version
Firmware: Simonk
Continuous working current: 12A
Peak current: 15A (for 10 seconds)
BEC output: No
Power input: 2-3S (does NOT support 4S or higher)
Weight: 1.5g without wires; 6g with wires
Dimension: 20 x 15mm
Supports up to 400-490hz input signal
Tested with DJI, NAZE32, CC and MWC flight controllers, and motor speed up to 25,000RPM.
Note: According to our test, this ESC doesn't work well with Sunnysky 2204 motors currently.
Continuous working current: 12A
Peak current: 15A (for 10 seconds)
BEC output: No
Power input: 2-3S (does NOT support 4S or higher)
Weight: 1.5g without wires; 6g with wires
Dimension: 20 x 15mm
Supports up to 400-490hz input signal
Tested with DJI, NAZE32, CC and MWC flight controllers, and motor speed up to 25,000RPM.
Note: According to our test, this ESC doesn't work well with Sunnysky 2204 motors currently.
Includes/Requires:
Includes:1 x ESC
1 x wire part bag
1 x heat shrinking tube